 |
|
|||||||
 |
||||||||
|
||||||||
THIN GAUGE ENGINEERING
AND HIGH PERFORMANCE
THERMOPLASTICS
AND HIGH PERFORMANCE
THERMOPLASTICS
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| Materials > Polyetheretherketone | ||||||||||
|
POLYETHERETHERKETONE PEEK PEEK is a crystalline aromatic structured high performance thermoplastic with very high temperature resistance, toughness, rigidity, creep resistance, low moisture absorption and is UL 94 VO rated. PEEK is highly resistant to solvents and exposure to radiation. PEEK is used in numerous automotive, electrical / electronics, aerospace and mechanical applications, including film for wire and cable coatings, bearings and aerospace components. There are numerous filled and specialty formulations that provide enhanced mechanical and/or wearing performance. 30% Glass Filled Tensile Strength at Yield – psi: 2.27 x 10/4 Dielectric Strength - V/10/3in: 500 Heat Deflection Temperature -66 psi: 599F / 315 C Elongation % at Break: 2 Comparative Cost: Very High! |
||||||||||
|
||||||||||
| ENSINGER/PennFibre 2434 Bristol Rd. Bensalem, PA 19020 Ph: 800-662-7366 Ph: 215-702-9551 Fax: 215-702-9552 email: penninfo@pennfibre.com |